- some of my install tips
- Re-check bolts/ nuts
- Two new items added to the kits.
- Will FFS work on JDM motor?
- Oil change tips...
- JRPC rubber hose
- What engine oil are you using with your supercharger?
- Alternator wire and mou nting bolts
- Install tip no. 1
- Hotside or coldside? Which is easier to install?
- Thermostat change
- Fuel Rail Installation and o-rings
- Idle Air Controller Gasket
- Fuel Pressure Regulator Test
- Fuel lines - Feed vs Return
- Wiring harnesses
- Washer Bottle bracket
- E-Cool Install for Hotside
- Coldside blower removal trick
- Oil viscosity?
- Adding 5th Injector - HotSide
- Issues with 97 Coldside Install
- FINALLY started the project...
- Fuel Rail
- Other Parts Needed For Install ?
- VICS Control Solenoid
- WARNING when upgrade-radiator
- Stainless steel EGR pipe...
- Check / Change Your Belt Regularly
- Zeitronix ZT-2: Installation Tips
- Vacuum line fittings?
- Where's your IAT sensor?
- Thompson remote oilfilter mod
- Adjustment of support bracket.
- Scan Gauge Install on 2001
- Wiring Diagrams up to 2000
- 99-05 fuel line with high flow fuel rail
- Setting TPS on stock TB
- Torque Seal
- Fuel Block for duel E-Cool
- How to T nto fuel line for duel E-Cool?
- Walbro Fuel Pump Upgrade
- Adding O2 sensor bung for wideband
- Install in earnest, Day 1
- Nuts under manifold
- Details of the DIY kit?