- Dan's 94
- Daniel's 94 Dyno
- The first official FFS 94 FFS system ships to OK.
- OK Dan tell us
- Dan's water re-route.
- 94-97 FPR Solenoid Vacuum line.
- Please Welcome Philip in Riverside CA
- We all know Steve as a potential vendor but....
- New guy with questions
- Install Help/Questions
- Crank Pulleys and BTB Compatable with BRP kits?
- 95 M Edition Question
- Est hp and pulley size on a 94 coldside?
- Welcome to Ken
- Welcome to Douglas in Pennsylvania
- Deals Gap
- A couple installation questions
- Bipes ACU
- It's Alive!!!
- Fuel Pressure and Knocking
- Engine missing badly
- Belt rub
- Theory of operation
- Dyno chart comparison please.
- Welcome Shawn
- Welcome Brian
- Hello from Canada
- Hotside
- Well, welcome to Phillip
- Install questions for my 95 with AC
- Intake Manifold Nuts...
- Problems with crank pulley bolts snapping?
- Pictures of the install
- SOT pulley issues?
- Welcome to JM
- Welcome to The Crazy red Italian
- HP and torque limits? Cold side kit
- big smooth power with new coldside ffs
- Welcome to Mark
- Welcome to Paul
- Welcome Derek
- 94-97 Fuel Rail
- Coldside questions!
- Welcome to Doug
- 94-97 motor in 91, what are my options?
- Welcome to Jean-Michel
- Welcome to Mark
- Tach signal at ECU?
- Replacement Fuel Injectors - Urgent
- Which clutch???
- IAC questions on 95...
- Securing vacuum lines?
- Stock FPR
- Ready to Buy???
- Fuel lines on a 95
- It's ALIVE - sort of...
- Boostin but . . .
- Coldside hesitation at the track
- How much boost can I expect?
- Is the R4 intake still sold?
- ABS Fault Codes
- Got an extra powercard I can borrow?
- Tps @ Wot
- It runs! and a question for NA FFS guys . . .
- New member Questions
- Half way done on a '94 install.
- Cs M45???
- Eventful weekend with the coldside.
- DENSO 280cc 4-nozzle injectos
- starting installation on a 95 m
- So far so Good on my '95 A couple of questions though.
- More questions on my '95
- Anyone have access to ABS Codes for 95 Miata?
- Moss Oil Cooler Relocation?
- 92 with 1.8 swap can I add a SC?
- Iat?
- Boost Sensor?
- Vacuum line and wiring for 5th injector
- Fuel Lines
- Lean Tip In
- Boost Gage and A/F Ratio Gage
- Vacuum line/egr system question on a '95
- 5th injector Wiring
- It Started.!!!!!????
- Idles, but stumbles/"bounces" @ 2300 RPM
- Stock oil cooler is unhooked
- New thread to be deleted!
- Going to Dyno!
- anyone running w/out stock AFM
- When the best laid plans go awry (novel length)
- 0-60 times with ColdSide
- Hesitation problems
- Power Steering Fluid "Blowby"
- Hello+What to buy
- New guy here.
- Hotside cold side.
- What else do I need to get 190/200 whp w/Coldside?
- FFS Coldside installed in Philly area
- Can a BRP M45 Coldside Use Your BTB ?
- extending the AFM sensor
- 94-97 cars with ABS
- Help my engines pings and e-cool is maxed
- MPG and tuning question
- Car's Been Sitting A While - Possible Gotcha's?
- install help
- 99 Months....
- Lean run condition on 95
- oil leak
- Obd2
- Newbie--97 M---coldside vs hotside
- boost leak?
- Replacing engine
- What happened here?
- exhaust cam - one tooth off
- 95 Sensor Readings
- Now running, but very lean
- Car is a real slug when cold
- TPS Wiring
- Advancing timing
- What size fastener for the TPS?
- Lean spike & hesitation finally cure! Thanks, Bill.
- Installing my FF SC this weekend
- AF results from reflash
- Boost reference hook up to stock FPR
- Time for a fuel pump?
- Injectors; stock or larger ?
- Who's tracking their 1.8L coldside?
- Relocation of the washer bottle
- Time for a clutch - what else should I do?
- Injector removal question
- A new FFS S/C in SoCal
- What do I need?
- Died and now won't start - MAF?
- Norwegian install
- Sticky/Hanging Throttle Making Me Crazy
- Iat
- Beverly is pinging.
- Sheared the crank pulley key
- It finally runs... sort of