Long nose M45

[needboost]

Hi Tom,
I read that this might be the place to ask about a smaller SC pulley for my long snout M45. I already have the 150mm crank pulley.
Is there a smaller SC pulley you have or know about for my SC?
Is there a larger crank pulley that I can use?

Thanks.

[Tom @ Fast Forward]

Actually, you might want to try Track Dog Racing. Gary might have what you want. I don't have any of the four rib pulleys. I assume that you are running off of the PS and A/C belt?

If you are already spinning that blower with 150/62.5, you are probably close to the max blower speed already unless your belt is slipping.

[Bacon]

Actually, you might want to try Track Dog Racing. Gary might have what you want.

I spoke to Gary about this same subject only a week ago and he says he doesn't carry any pulleys for the long nose M45. There was the famous "tony" pulley that worked for this but as of this writing your only option is to put the oversize pulley on the crank, or change out the snout on your blower to the short snout so you can run flat pulleys. Gary has a bunch of smaller OD flat pulleys for this purpose for the short snout M45.