PDA

View Full Version : Auto tranny cooling reolocation tip


gludlow
05-06-2008, 06:59 AM
Morning all!
Just re-adjusted the alternator belt last night. The installers, I believe, re-routed the A/T fluid lines, and ran them right below the lower alternator pivot bolt. This made it even harder to get to than normal! I would recommend, if there is an alternative, to route those lines somewhere else for an A/T Coldside install.

gludlow
05-23-2008, 12:16 PM
Do you have the Coldside kit installed on an Automatic?

philkerney
06-23-2010, 09:55 PM
Hi gludlow,

How is the A/T coldside running?
Which do you have?

I am looking to add a coldside to my 91 eunos 1.6

What tips can you pass on?

PJK

gludlow
08-06-2010, 11:59 AM
Mine is running great! I got the "standard" Coldside kit with 5th injector and timing card.

I did not do the install myself, but from what I heard, there were no automatic transmission related problems, aside from re-routing the coolant lines a little. That is probably not even needed now that the air filter location has been changed.

I highly recommend it :-) You may be the first 1.6L Auto to get Tom's kit!