SRP Racing Pedal Covers - Machined Aluminum

[James J]

$45 - $55

CNC Machined from billet aluminum. These are all new sets, in the wrapper and box. They include mounting hardware and an instruction sheet. With a machined finish, these sets list for $80,and the engraved options are not available. Some of the sets have engraving done on the brake and clutch covers. “Plain” = no engraving. “Roadster” = engraved with “Roadster”, etc. I also have a couple sets of brake/clutch covers with “Zoom” and “M” in the Miata font/script. If you prefer one of those then I can swap out the brake/clutch covers for the ones in the complete sets you see listed below.
The difference between a 90-97 set and a 99-05 set is the dead pedal cover. So, if you see a 4-pc set for the ’90-’97 car, but you have a ’99-’05 car, it will fit but you won’t be able to use the dead pedal cover. Images shown are representative of the appearance of each set. Some are 3-pc, some are 4-pc. Some have engraving, some don’t.


Here are the different sets available:
Updated 10:04am 6/29

“Plain” 90-05 3-pc (x2) $45
" M" (the Miata script M) 90-05 3-pc (x1) $45
“Roadster” 90-05 3-pc (x1) $45
“Plain” 90-97 4-pc (x2) $50
“Zoom” 90-97 4-pc (x1) $50
“Miata” 90-97 4-pc (x1) $55

http://i213.photobucket.com/albums/cc305/jjcoke/MX-5/MX-5%20Parts/P1010002.jpg

http://i213.photobucket.com/albums/cc305/jjcoke/MX-5/MX-5%20Parts/P1010004.jpg

[James J]

All remaining sets now $40 each + shipping.

[James J]

Updated 7/22
· “Plain” 90-05 3-pc (x2) $40
· “M” (Miata script "M") 90-05 3-pc (x1) $40
· “Roadster” 90-05 3-pc (x1) $40
· “Plain” 90-97 4-pc (x1) $40
· “Zoom” 90-97 4-pc (x1) $40
· “Miata” 90-97 4-pc (x1) $40

[Tom @ Fast Forward]

james,

Got any that say BRP. I might enjoy stepping on those? ;)

[James J]

Sure do! One or two sets maybe. Actually sold a couple of them this go around.

If I run out though, don't worry.... I'll have one last set for sale.
Of course they'll be attached to my 2000 Miata that will soon be going up for sale.

[James J]

Ok, I'm down to the last few sets left.
Prices are now $40. US Priority shipping is $5.
These will fit 1990-2005

“Plain” 90-05 3-pc (x2) $40
"M" (the Miata script M) 90-05 3-pc (x1) $40
“Roadster” 90-05 3-pc (x1) $40

[James J]

Got a few more sets put together.
List also includes a special for Tom or other FFS kit owners.

CNC Machined from billet aluminum. These are all new sets, in the wrapper and box. They include mounting hardware and an instruction sheet. With a machined finish, these sets list for $80 and the engraved options are not available. Some of the sets have engraving done on the brake and clutch covers. “Plain” = no engraving. “Roadster” = engraved with “Roadster”, etc. I also have a couple sets of brake/clutch covers with " BRP" and “M” (in the Miata font/script) and a " plain" set. If you prefer one of those then I can swap out the brake/clutch covers for the ones in the complete sets you see listed below.
Images shown are representative of the appearance of each set. Some are 3-pc, some are 4-pc. Some have engraving, some don’t. Here are the different sets available:
Updated 9/16
“Plain” 90-05 3-pc (x2) $40
" M" (the Miata script M) 90-05 3-pc (x1) $40
“Roadster” 90-05 3-pc (x1) $40
" BRP" 3-pc (x2) $20 <-- Perfect for Tom or any early FFS kit owner!
I have a very limited number of dead pedal covers, so if you'd like a cover for your dead pedal inquire about availability and specify what model year car you have. Add $5 for dead pedal cover to be added to a 3-pc set.

Additional Representative Photo:
http://i213.photobucket.com/albums/cc305/jjcoke/MX-5/MX-5%20Parts/P1010004.jpg
See my other ads too!

[Elphaba]

:confused: Got some that say FSS :confused:

[FormerDatsun510Man]

Tom,

The pedals on mine say BRP :taz:.

Bill

[Tom @ Fast Forward]

Are you bragging or complaining? ;)

[99mx5]

He's bragging... Bill's Racing Pedals are personalized. ;)

[FormerDatsun510Man]

You see, when I worked at BR Performance, I approached Brant for a set of racing pedals. I requested if I could get a set personalized with my name on them and he said sure thing... in fact, he could do it at no extra charge. It turns out he had a custom set that had his personalized initials on it also :biggrin:. From what I understand it didn't cost him any extra machining costs either :biggrin:. Unfortunately, Joe didn't have a personalized set for himself. Come to think of it though, James, if he did get one, you could have had your own set of JRP pedals too. FWIW though, the BRP pedals would be lighter than either the SRP or JRP ones...

Tom, btw, that gives me an idea. Maybe if you tried hollowing out the rotors and experimented with how thin you could make the supercharger case, you could lighten the MP62 coldside even further. If that doesn't do it, we could try swiss-cheesing the driveshaft.