Cold air right side

[slideways-Erik-silver99]

This is my fist time on the board
I just took my first spin around the block and I love my FFSC. Hope to get it on the dino and tuned soon. I also need to loom a few more wires and finish the boost and wide band up. Just thought I would show a pic of my COLD AIR.

[bogey]

That looks beautiful! Great job.

[ROZ]

Nice one! Real clean too. :drool5:

[Tom @ Fast Forward]

Didn't know there was a cold air slot above the light on the passenger side too? I thought it was only on the driver's side.

Nice job.

[Mark]

Beautiful!!! I'm completely jealous! No way I could ever do that on my 95 with the ABS in the way. Even without the ABS mine seems to have a whole lot more "stuff" in the way.

[99mx5]

Looks nice! Where did you get the rubber edge strip? How did you mount the radiator overflow tank? Relocating the canister bracket was a good idea, but I'm not sure if it only supposed to be mounted vertically.

[Tink]

Good Questions - details needed! Esp, what year car.

My memory says it won't fit in my car, but I would love to have a bad memory.

[slideways-Erik-silver99]

The canister seems to only be a holding tank after looking inside it so the vac line just needed to be on top. Tom your right I cut my own hole in the body the indentation is there you just have to remove it. I have not finished moving the window washer bottle yet but its going to be an ABS miata one I picked up at a auto yard for $10. The colant container moved to left same one. Thanks for the complements

[slideways-Erik-silver99]

Autozone for the edge molding its for doors its in black and chrome but the black is more flexable.

[Tink]

It is a real nice job. Clean and innovative.

I studied my car this AM; figured out what to move, but in order to fit I would have to removed by shock tower bracket.

I think I can do the other side by running a flex hose under the shock tower bracket.

[oldtimer02]

Great job!
I have done the same thing on my '02. I relocated the overflow tank as you have, used a washer tank from an ABS Miata to relocate it to the drivers side.
Since I have an '02 with the shock tower brace, I had to relocate the "boost control" and other electrical stuff down where the ABS would be on ABS cars.
I had to lengthen the wires by 6" to get them to reach.
I'll try to send the pictures.
I do have flat patterns.