RHD Photos

[JamieUK]

Anyone got some picture of a RHD coldside install?

I'm particularly interested to see the clearance at the back by the brake servo and how the intake has been hooked up.

Cheers,
Jamie.

[MX-Drew]

Here are a few pictures.

[busterboyd]

Hi from New Zealand, Kiwi Supercharger # 2 RHD being fitted now but I need some help with the fitting of hoses.
From your photos I see you have gone from the engine breather ( on the Supercharger side ) straight into the throttle body.
The new kit I have just got does not have a port on the throttle body for this.I assume it can go into the port on the under side of the throttle body adaptor as this has noting going to it ( no EGR on my car )
I see that different action is taken by every one on the exhaust side of the cover.
Some fit a fitted , some run a hose from the port to the air inlet tube.
Others seem to have a hose tee'd off going also to the IAC valve.
Can any one put me clear on what is the best way (by the way what does the IAC valve do? )
I note in the manual from the drawing one port goes to the Vacuum distrution block , the other port goes where ?
Is it critical on which port goes where?