Another pulley upgrade question

[happychap]

I didn't want to hijack Scuba Steve's thread so I am starting my own.

So I am currently running a base SOT hotside with I believe 95/65 pulleys.

What can I upgrade too without having to add extra injectors, intercoolers, etc? And what kind of boost/hp increase could I expect to see.

I'm thinking crank pulley only as I don't want to mess with the supercharger

[chuckerants]

If you have the "black box" fueling, then the PC Pro would probably help you use at LEAST the 100mm pulley that you should have received.

However, with the e-cool, I was able to run a 110mm pulley.

[Tom @ Fast Forward]

I would guess the PC-Pro would let you run a 105mm pulley. Probably 180-190WHP with a BTB, 170-180WHP with a stock TB? 105mm on a coldside (BTB) is 190-200 and the BRP/SOT hotside is typically 10WHP less with the same pulley.

[pumpkin]

Happy, I went from 95 to 100 on my 99 with no other changes and haven't noticed any problems. Summer may be a different story. Actually, I'm still a little rich with the PC. Boost went up from 6 to 7 psi.
I'd definitely recommend Tom's pulleys over SOT.
JD

[happychap]

Thanks for the replies. When I have some funds I'll definitely be looking for a 105mm pulley.