PDA

View Full Version : Used SS for sale

Tom @ Fast Forward
01-31-2007, 04:55 PM
$150 for a used two map Split Second controller.

Second map is independent and can be used for WI.
Kurt
03-02-2007, 11:41 AM
Tom,

I wish I had seen this earlier. I bought one off Mnet a few weeks ago. I received the SS without any directions. Would you or anyone else have some directions in its installation / tuning. I am debating whether to install it pre-blower first or get your "BRP Coldside" adapter.

Of course the biggest question is, what size pulley should I upgrade too.:excl:

Regards,

Kurt
Tom @ Fast Forward
03-02-2007, 10:48 PM
Kurt,

Do you need the software too? Or just the instructions?
Kurt
03-03-2007, 07:01 PM
Well, unless the seller replies, I'll probably need both. My unit has the 550 cc injector.

I did a little research on Mnet and basically have most of the installation figured out. I would like to get a confirmation on the wiring.

How do you get the different maps and load them? It appears that there is some kind of port in the box. Do I connect a lap top?
Tom @ Fast Forward
03-03-2007, 08:23 PM
I have them and will get them to you tomorrow .
chuckerants
03-03-2007, 08:45 PM
Well, unless the seller replies, I'll probably need both. My unit has the 550 cc injector.

I did a little research on Mnet and basically have most of the installation figured out. I would like to get a confirmation on the wiring.

How do you get the different maps and load them? It appears that there is some kind of port in the box. Do I connect a lap top?

Kurt, you can download the Split Second software from my website. It is 27mb and it's the exact thing you get on the Split Second CD.

The directions for install can be found at http://www.splitsec.com/. It's under PRODUCTS, Additional Injector Controllers: Laptop programmable control for up to 4 injectors.

http://www.chuckfullobeans.com/images/miata/SETUP.EXE

Tom can help you with selecting the MAPS. :)
chuckerants
03-03-2007, 08:51 PM
As for the cable, you'll need a Serial DB 9 pin cable - M to F IIRC.

Take a look at your laptop and the SS box and get the appropriate cable here.

http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10212&style=