PDA

View Full Version : Other Parts Needed For Install ?


Race Grandpa
04-07-2007, 07:42 AM
I send an e-mail to a couple of Authorized Installers to get their advice for the install to be done by my mechanic.

One of them mentioned that the mechanic will need the following:
1) High pressure fuel line
2) Additional vaccum line
3) Hose barbs (?)
4) Multi-conductor wire

Did you find that you needed the same???

Where there other things that you needed???

socal pat
04-07-2007, 02:48 PM
Well, a year ago when I did my install I did need to go pick up some additional vacuum line and some fuel injector line. However when I did another install a few weeks ago I needed nothing from the parts store. The kit was complete. Oh I did make a little adapter to go from the supplied vacuum line to the nipple on the Intake manifold. I just used a 15 cent vacuum reducer I had left over from my boost gauge install.