guesses for end point HP/tq level at the wheels

[Elphaba]

Just for fun now... lets put down some good oll speculation as to the final tune that Tom and ADC get out of her on the dyno. Lets see who gets closest... Ill go out on a limb and say ummmm: 205hp / 170 tq shear speculation. :sweatdrop: No fair using Torko Tom:nono:

[magnamx-5]

my bet is on 183 whp 147 lb/ft :D before the serius tunning begins. already on the other thread but lets see if i am close. No fair using a timming controller elepha :2gunelf:

[Elphaba]

OK! No timing pulled; No Torco. :) Im making an assumption here but Im fairly sure Tom's goal is to "install turn key and enjoy"; So thats why I had the new motor set to whatever stock timing is... 12 Deg??? Anyways; there IS a JR boost timing controler in the glove box but I dont know if it was ever hooked back up after the engine swap. :seeya: Better check this Tom. Last I knew, It was set to pull some timing. Just turn the thing off or all the way down to the left. Test Monkey out!

[Elphaba]

:offtopic: Better yet: If its not gonna be needed, have the guys pull it so I can sell it when I go to sell the JR M45:2gunelf:

[Tom @ Fast Forward]

I think Magnum-5X is going to be close for the CARB version with 105mm pulley. He's using my favorite 0.8 multiplier for torque. It might even be closer to 180/144. However, that is what bigger pulleys are for. ;) I'll take 180 for the base kit. That's not to shabby for a 1.6L. I think we'll push a safe 200WHP with a larger pulley.

Has anybody got any DynoJet base runs for a 90-93? 90WHP?

[chuckerants]

I think Magnum-5X is going to be close for the CARB version with 105mm pulley. He's using my favorite 0.8 multiplier for torque. It might even be closer to 180/144. However, that is what bigger pulleys are for. ;) I'll take 180 for the base kit. That's not to shabby for a 1.6L. I think we'll push a safe 200WHP with a larger pulley.

Has anybody got any DynoJet base runs for a 90-93? 90WHP?

I have a 93 with a RB intake and a catback at 102.6 HP and 90 Torque.

[lovemx5]

A few years ago my 92 did 99.4 hp and 89.9 ft-lb with 14 BDTC, no other mods.

[lovemx5]

The FM website has a dyno plot of a 90 with K&N filter at 89.9 hp and 83.6 ft-lb.

BTW, I forgot to mention in my previous post that my 92 had a K&N filter.

[magnamx-5]

i think with some good tunning on the base maps 190 or so is quite possible on a turn key kit. 10 psi with this blower should break 200 whp easy esp if the heat is taken care of. :D :tank:

[Elphaba]

:sweatdrop: SOO nervous... SOOOO nervous... Tom booked the dyno for 9 am today... its 11 now...:sweatdrop: CANT STAND THE PRESSURE :ack2:

[magnamx-5]

any news? :santa: or tom bring you a present yet?

[Tom @ Fast Forward]

Do to problems beyond my control it is still not assembled. Next Wednesday is the current date. I am just as disappointed as you. :(

[magnamx-5]

:nopity: dammit tom you just had to sleep did'nt you :devil2: :boxing_smiley: :sweatdrop:

[Tom @ Fast Forward]

I design them but I don't do much wrenching any more. I leave that to those who get paid to do it. :) They are up to their eyeballs in American Iron and Dan's Miata is waiting it's turn. We are going to do some other things to the 99 for test on Wednesday as well. Stay 'tuned'. ;)

[lovemx5]

All systems clear for tomorrow?

[Tom @ Fast Forward]

As of the moment, all systems are go. Subject to change tomorrow. But I hope it is ready.

[Elphaba]

:tank: Better call em first before driving all the way up. esp after last time:mad:

[Elphaba]

:sweatdrop: UUUGH... Here we go again:sweatdrop: She's susposed to go on the dyno again today and here I sit in Havasu. Dont blow her up Tom:svengo:

[lovemx5]

C'mon Tom post something. :sweatdrop: I'm checking this thread every 10 minutes. :online2long:

[Tom @ Fast Forward]

They are finishing it up today after I left. I will be gone until Monday. Probably know more Tuesday. Out of my hands. :(

[Elphaba]

:) Much as I hate the delay this means I can be there for the tuning!:) Ill be in Phoenix all next week! Leeme know whats what on Tuesday Tom and well hook up at ADC for the big event!

[magnamx-5]

So what is the deal?

[chuckerants]

It sounds like we have to wait til Tuesday for any HP numbers.

Hmm. I think I'm free on Tuesday. Maybe I'll drop by ADC and see what's what myself. :)

[Elphaba]

:party: :party: DYNO PARTY AT A.D.C.!!!:taz: We will have to make SURE they have it buttoned up and and ready to run befor we finalize plans...

[99mx5]

Actually, the plan is for Chuck to see the dyno results for Elphi and quietly let everyone know so that you will be the last to know. ;)

[Elphaba]

Actually, the plan is for Chuck to see the dyno results for Elphi and quietly let everyone know so that you will be the last to know. ;):taz: :2gunelf: I SHALL FOIL YOUR EVIL PLAN:gun_bandana:

[bambam]

:party: :party: DYNO PARTY AT A.D.C.!!!:taz: We will have to make SURE they have it buttoned up and and ready to run befor we finalize plans...

Yo we suppose to have a dyno party I think Thursday b4 Memorial Weekend.. that being FFS's open house. I hope everyone can make it.

Buck