PDA

View Full Version : PC PRO Settings


ThomS
08-31-2007, 02:12 PM
I am not sure if this has been asked yet, so I hope not.
If the setting for PR PRO for E-Cool is 4 and I now have it at 5.5 will this make the car run too rich.? . I was getting small noise but not a full blown ping noise at red line in 3rd 4 th or 5th gear. So I re-set the pc pro last night and will test it today to see if it helps. Any thoughts?

Tom @ Fast Forward
08-31-2007, 05:08 PM
The adjustment on the PC-Pro E-Cool is not very broad. Going all the way to 8 doesn't add a lot of fuel. No problem there.

ThomS
09-01-2007, 10:53 AM
Can anyone give a complete set of settings for the pc-pro, what the FFS
spec's are? I now know that the pc-pro for e-cool should be set at 4 for factory specs, but what about the other pc pro?

ThomS
09-01-2007, 11:15 AM
Found the default settings.. THANKS

ThomS
11-12-2007, 03:44 PM
One question on the settings. The setting for the entire fuel curve,
yellow/blue and the red/blue settings should be the same, Why?
what does each setting cover? They have mine set different
yel/blu is 2 and red/blu is 4. what will this set up do?

Tom @ Fast Forward
11-13-2007, 07:50 AM
The Y/B adjusts the curve and the R/B adjust the slope, more or less. They can be totally different.