Dent In Header Should I fix?

[Mx5-4me]

I bought a header on eBay knowing it had a dent in it. I was wondering what your opinions were on how to fix it or if it's even really worth getting the dent out. (not a significant enough of a restriction to worry about)

It's a racing Beat 4 in to 1..

1.7" OD tubing has been used for the primary tubing, and then collects into the 2.375" OD secondary

http://blindmind.smugmug.com/photos/194835251-L.jpg

http://blindmind.smugmug.com/photos/194835235-L.jpg

http://blindmind.smugmug.com/photos/194834904-L.jpg



Thanks

[Mx5-4me]

Turns out the dent might be there by design.

Glad i asked.. I would have felt quite foolish if i'd gotten it fixed then needed to redent it to clear the steering shaft..

http://forum.miata.net/vb/showthread.php?t=250135

[bogey]

I put a similar dent in the RB 4-2-1 that is installed on my 97. This was to keep it from knocking on the bell housing. Removed header and hit it with a 12lb sledge. It looks a lot like that. No more rattling.