PDA

View Full Version : Iat?

kevtar658
09-15-2007, 11:24 AM
My car did not have a seperate IAT, according to the haynes manaul it is built into the MAF. Is this correct? I want to make sure I'm not missing anything.
Thanks,
KT
kevtar658
09-15-2007, 12:20 PM
I'm also not finding even close to enough wire to run the MAF connector to the MAF's new location under the supercharger, did anyone else have to run new wire for this?
Thanks, KT
bogey
09-15-2007, 06:05 PM
You will need to extend the MAF wiring harness several feet. I think it is only 4 or 5 wires. Ideally, solder and heat shrink the connections, but crimp connectors will work fine.
bogey
09-15-2007, 06:13 PM
My car did not have a seperate IAT, according to the haynes manaul it is built into the MAF. Is this correct? I want to make sure I'm not missing anything.
Thanks,
KT

I would not trust anything in the Haynes manual. It is best used as kindling in the fireplace... Get a factory service manual.

But yes, the IAT on a 94-97 is not a separate unit.